Welcome To our shop !

HVArt Gesso Style Primer GSP ORIGINAL Tintable

$35.568 $44.46
SKU: NMWY990060175848
Availability: in Stock

HVArt Gesso Style Primer is a waterborne Polyurethane Primer developed for unsurpassed adhesion to a whole range of surfaces and is very forgiving for hand application.It has a high pigment…

Qty:

HVArt Gesso Style Primer is a waterborne Polyurethane Primer developed for unsurpassed adhesion to a whole range of surfaces and is very forgiving for hand application.It has a high pigment content and a high solids content, with excellent opacity and excellent filling power.GSP is formulated to sand exceptionally well, with immediate powder-up, and an ultimate skin-like feel.GSP can also be applied very successfully by Spray where required.GLOSS LEVEL:n/a (Matt)COLORS:A range of 10 shades, including Pastel Undertones, White and black.AREA OF USE:All woodwork, joinery, furniture, kitchen cabinets & trim including picture frames, skirting board, doors & staircases. Wall surfaces, ceilings, coving.METHOD OF APPLICATION:Synthetic brush & fine-haired rollersMixing procedure:Ready for use depending on requirements, for best flow by brush GSP can be thinned with drinking water up to 20%, build will be proportionately reduced but coverage and opacity remain.Technical characteristicsSolids content (%): 56 1Specific gravity (kg/l): 1.365 0.030 Viscosity (DIN 6 at 20C): 40 8VOC Content:47 g/ltrRecommended application weight: 150 to 250 per coat if applied by spray to timber substrate. No realistic maximum loading when applying by hand, as film weight cannot achieve this from manual application methods.DRYING:Touch dry (room temperature): 1 hour Sandable (room temperature): 4 hours sandable (by forced drying tunnel): 1 hour Sandable (by forced IR drying): 30minsDrying times are indicative because they depend on temperature, humidity, & importantly air flow conditions.Drying of waterborne products must take place at temperatures not below 15C and at a relative humidity preferably not exceeding 85%. Out of these limits, there is a slowing down of the drying and/or formation of a less hard and resistant film. It is always advisable for drying to be forced, with air previously de-humidified and warm (20-30C).

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.