Product DescriptionThe EATON MCBPL is a padlockable accessory designed for use with compatible EATON miniature circuit breakers. It allows a circuit breaker handle to be locked in the open or closed position using a standard padlock, preventing unauthorized or accidental operation. This type of lockout device is a common requirement in commercial and industrial electrical installations where lockout/tagout (LOTO) procedures are enforced. Licensed electricians and maintenance professionals install this accessory as part of arc flash and energy isolation compliance programs.This accessory is suited for commercial and industrial electrical panels where LOTO compliance is required. It is typically installed on branch circuit breakers in distribution panels, motor control circuits, and equipment disconnect applications. The MCBPL is a field-installed, clip-on style accessory intended for use by qualified electricians during panel service or commissioning work.Key FeaturesLocks circuit breaker handle in the open or closed position for energy isolationSupports lockout/tagout (LOTO) compliance per OSHA and NFPA 70E requirementsField-installed accessory requiring no special tools for attachmentLightweight construction at 0.1 poundsCompatibilityDesigned as an OEM-style accessory for compatible EATON miniature circuit breakers. Verify fitment against the specific circuit breaker series before installation, as padlockable accessories are model-specific.Installation NotesInstallation must be performed by a qualified electrician. De-energize and lock out the panel before attaching or removing any circuit breaker accessory. Verify that the accessory is fully seated on the breaker handle before applying a padlock. Follow applicable requirements in NFPA 70 (NEC) and NFPA 70E for lockout/tagout procedures.Technical SpecificationsWeight: 0.1 poundsUPC: 78211309930Standard InformationBrand: EATONManufacturer Part Number: MCBPL