Product DescriptionThe WIREMOLD 2611 is a 90-degree flat elbow fitting designed for use with Wiremold surface raceway systems. It allows a raceway run to change direction horizontally along a flat wall surface without cutting or bending the raceway itself. At 2.625 inches in width, it is sized to match compatible Wiremold raceway channels. Electricians use this fitting during surface-mount wiring installations to route conductors cleanly around corners while maintaining a professional, code-compliant appearance.This elbow fitting is used in commercial and residential surface raceway installations where conductors must change horizontal direction at a 90-degree angle along a wall. Typical applications include office wiring, data and communication cable management, and branch circuit extensions run on wall surfaces where cutting into the wall is not practical or permitted. It is installed as part of a complete surface raceway system rather than as a standalone component.Key Features90-degree flat elbow allows horizontal direction changes in surface raceway runs2.625-inch width matches compatible Wiremold raceway channel sizingDesigned for surface-mount installations on flat wall surfacesMaintains raceway system continuity and conductor protection through the turnSupports a clean, finished appearance in visible wiring installationsCompatibilityDesigned as an OEM-style fitting for use within compatible Wiremold surface raceway systems sized at 2.625 inches.Installation NotesInstallation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits in the work area before beginning installation or pulling conductors through the raceway. Secure the fitting to the wall surface per the raceway system manufacturer guidelines before routing conductors. Do not exceed the fill capacity of the raceway channel as determined by applicable NEC tables.Technical SpecificationsWidth: 2.625 inchesAngle: 90 degreesType: Flat ElbowUPC: 78677608479Standard InformationBrand: WIREMOLDManufacturer Part Number: 2611